image of READY prompt

Wang2200.org

Listing of file='IDS2sS27' on disk='vmedia/701-2718B.wvd.zip'

### Logical Record 0
"\E1IDS2sS27\A2[0\038\F2\96[\80\9A\FC\80\86I4\1E\C04\97=\0F\BF\0C\AE        1IDSSCRNF                                 "
"                                                  p\00\00\00\00\00\00 17ELT060382 When addition"
"al tests and operations are permitted, the following may be used.                  "
"                                                                Tests:  xxFLG#ss = "
"SYSFLAG state  xx = IF/OR, # = 0-9 or A-Z, ss = ON/OF                xxLFK=## = Las"
"t FN key    xx = IF/OR, ss = ON/OF or FN key #                                     "
"              (31=CANCEL, 32=EXECUTE, 33=EDIT)                 xxERR### = Error num"
"ber   xx = IF/OR, ### = System error message #              xxOLDPFs = Old P/F stat"
"e  xx = IF/OR, s = P(pass) or F(fail)                                              "
"                                                      Operand1   Operand2   "TRUE" "
"conditions for multiple tests                      IF......   IF......     P/F AND "
"Test #1 AND Test #2                             IF......   OR......   ( P/F AND Tes"
"t #1 )   OR   Test #2                        OR......   IF......   ( P/F OR  Test #"
"1 )   AND  Test #2                        OR......   OR......     P/F OR  Test #1 O"
"R  Test #2                                                                         "
"                            Operations:                                            "
"                                  "FLAG#=ss" = Set SYSFLAG# to ON or OFF           "
"                               "LSTFK=OF" = Set last used function key flag to OFF "
"                            "LSTFK=##" = Set last used function key flag ON (to a s"
"pecific value)           "SEQ#=###" = Set next sequence number (3 digits, 0-255) to"
" a value              "SKIP##PF" = Skip the next ## pass/fail specifications       "
"                   "BACK##PF" = Skip back ## pass/fail specifications              "
"                "SETOLDPF" = Set "old P/F" to current pass/fail condition          "
"             "GETOLDPF" = Set current pass/fail condition to "old" one set above   "